VapeCon starter kits upgrades and spare parts: Refillable
VapeCon starter kits advice for Norway, covering troubleshooting, what to look for and where the trade-offs actually sit.
Search results for vapecon starter kits in Norway are crowded, which is why this page focuses on what actually changes the experience. Comparing this against a 65:35 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
There is no single best vapecon starter kits for everyone in Norway, and anyone telling you otherwise is selling something. Comparing this against a 65:35 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
The build quality on Beipu B2 is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Type-C fast charge takes about 78 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Pricing in Norway shifts with import duty, so the figures here reflect current NOK rates rather than a fixed list price. Airflow control on the Beipu B2 is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 70, and pushing beyond that adds heat rather than anything worth carrying.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 65:35 PG/VG liquid sitting in the chamber. The Champagne Gold finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Battery behaviour is where the Beipu B2 earns its keep: the 1200 mAh cell holds a usable charge for most of a day at 70 and recharges over Type-C fast charge. We would pair the Beipu B2 with a 65:35 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock.
Flavour tracking stays consistent from the first day to roughly the 1.0 Ω mesh mark before the profile flattens and a swap makes sense. In Norway, availability of the 1.0 Ω mesh coil is the practical bottleneck, not the device itself. Charging over Type-C fast charge takes about 78 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1558 full puffs from a charge at 10 mg/ml, based on average session length in our testing. Delivery across Norway is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | Beipu B2 |
|---|---|
| Brand family | Wismec |
| Battery capacity | 1200 mAh |
| Power range | 70 W |
| Liquid capacity | 3.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 300 ml |
| Liquid ratio | 65:35 PG/VG |
| Nicotine strength | 10 mg/ml |
| Material | zinc alloy |
| Charge port | Type-C fast charge |
| Connector | magnetic contact |
| Airflow | ring control |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Frozen Berry Sorbet: sweet, icy, described as cold berry inhale with a soft exhale. On a 65:35 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Norway
Availability in Norway is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and NOK rates move, so treat prices as current rather than fixed.
If you would rather talk it through, use the contact details below and we will answer directly.